Clear-Com's crisper, clearer communication with the new DX410.
The Clear-Com DX410 is a two-channel 2.4GHz digital wireless intercom system that features 7 kHz wideband audio for exceptional audio clarity. It is the first DX Series wireless intercom system to offer this level of audio frequency range.
The DX410 also comes with upgraded radio technology for better transmission/reception, 2-wire/4-wire bridging, and 2-wire auto-nulling. The bridging capability allows the 2-wire and 4-wire ports to be combined on either channel A or B; enabling operators to use a 4-wire out to send all audio to a mixer, matrix intercom or other audio source. 2-wire auto-nulling makes it easy to integrate the DX410 with Clear-Com or TW wired partyline systems.
The DX410 uses a frequency hopping system (FHSS), and offers spectrum-friendly and Adaptive Frequency Hopping (AFH) modes, to avoid interference with Wi-Fi, while operating in the 2.4GHz band means that DX410 does not require radio licensing for use.
The DX410’s compact BP410 wireless beltpack and WH410 all-in-one wireless intercom headset are designed to remain comfortable during long hours of usage, with both units providing up to 12 hours of battery life on a single charge. Each DX410 base station can support as many as 15 BP410 wireless beltpacks and/or WH410 all-in-one wireless headsets at a time.
The DX Series technology is renowned for quality and performance, and the new DX410 will only affirm that reputation, » said Craig Fredrickson, Product Manager at Clear-Com. « This new addition is truly an exceptional digital wireless system in terms of range, reliability, sound quality and comfort for the size of the system. »
DX410 2.4GHz - Digital Wireless Intercom
The DX410 is a two channel digital wireless system, delivering an overall better experience in performance, range and sound.
The system features 7kHz wideband audio, the same audio quality level as high-end wireless intercoms. Its expanded audio range and increased intelligibility enables even soft whispers to be heard clearly, even in high RF interference environments.
DX410 also features 2-wire and 4-wire bridging and 2-wire auto-nulling. The bridging capability allows the option for combining the 2-wire and 4-wire ports together on either channel A or B, allowing operators to use a 4-wire out to send all the audio to a mixer, matrix intercom or other audio source. 2-wire auto-nulling enables fast and accurate integration with Clear-Com or TW wired partyline systems.
- 7KHz wideband audio
- 2-wire and 4-wire bridging
- 2-wire auto-nulling
- Lost packet concealment
- Upgraded radio
- Supports up to 15 beltpacks and/or headsets
- Rock n Roll
- Houses of Worship
- Hire Companies
- Theme Parks
- Leisure Facilities
- Industrial Applications
- Military use
Each BS410 base station can support up to 15 registered BP410 wireless beltpacks and/or WH410 all-in-one wireless headsets. In a single-channel operation, any four beltpack users can engage in simultaneous, full-duplex (talk-listen) communication, while only three users may be in full-duplex mode in a dual-channel operation.
DX410 is simple to set up and configure, taking less time to deploy. No software programming is necessary.
The BP410 is a rugged, light-weight, ergonomically designed beltback to be used with the BS410 base station. Single-channel operation allows any four beltpack and/or all-in-one wireless headset uses to engage in simultaneous, full-duplex communication. In dual-channel operation, three users may be in full-duplex with up to 13 additional users in listen-only mode. The BP410 has a rugged, over-mold, reinforced casing and long-lasting keypads with no mechanical switch. Using the BAT50 Li-Ion battery, the BP410 has up to 12 hours of battery life.
The WH410 is a light-weight, single-ear, all-in-one wireless headset that operates in the 2.4GHz frequency range. This headset is used with DX410 wireless system. The WH410 uses the BAT50 Li-Ion Batteries and AC50 Battery Charger.